How to add cameras to Brickcom NVR via ONVIF?
Users can use ONVIF to add camera to Brickcom NVR for liveview monitoring, recording, video parameter setting, motion detectionm PTZ control, etc.
1. Please check below information before adding IP cameras to Brickcom NVR:
A. Make sure that your camera supports ONVIF.
B. Some camera has specific port for ONVIF protocol. Please check the port from camera website.
C. Username and password are both necessary.
2. Please open NVR configuration page, and go to IP Camera> Camera Settings,and the add the camera with the requested information. Please remember to select the vendor as "ONVIF", and input the ONVIF Port.